News:

1400 GTR - A beast

Main Menu

battery ternimal's

Started by tapps, October 03, 2012, 06:10:20 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

tapps

i think we should all CHECK OUR NUT'S,I went to attach a trickle charger lead on the battery ternimal's to FIND THEM BOTH NOT EVEN FINGER TIGHT,absolutely disgusted to find them like that & i'll let the DEALER KNOW ABOUT IT !!!!!!!!!!!!!!  :taz: :taz: :taz:

viper

maybe they loosened with vibration, i dont think battery terminals is a specific on any service schedule ????

tapps

if they were done up TIGHT,i cant imagine VIBRATION causing it,i may be wrong,still gonna let them know about it.

viper

vibration causes the header bolts to loosen , the engine mounting bolts to loosen, just a thought, probably were loose

Darren33

Funny you should bring this up. I attached a charger lead to my battery 2 days ago and the Positive lead on mine was loose too.  Had the same problem on my old 2009 bike.

Not heard of the header bolts coming loose though, may have to check these out too.

100milesaway

Your problem is with the dealer, the bike arrives in this country with the battery disconnected, and is then fitted at pdi stage by the supplying dealer  :hammer: :2guns: On this issue the big K are innocent :smiley:.
What would you rather be   or a wasp?

viper

#6
Quote from: Darren33 on October 03, 2012, 07:12:47 PM
Not heard of the header bolts coming loose though, may have to check these out too.

posted here yesterday

http://www.gtr1400.co.uk/forums/index.php/topic,2230.0.html

kfshman

a loose battery wires can lead to heat in the wires and electrical malfunction

dokterdave

Mine was installed backwards :no:
That is
Negative toward the outside of the bike.

kfshman

thread locker fluid is the best to prevent vibration loosening bolts and nuts.
but you have to use it on the parts that you don't want to open regularly

Rusty

Mate ... why are you "absolutely disgusted" that the nuts are loose ? That must just be bike movement and vibration working them loose ... a dealer isn't going to check them as part of any service and when you tell Alfs about it he'll go " Oh well they do work loose sometimes we'll check on it next time " ... smile ..... 
PS ... how is the solar charger going ?  :smiley:

tapps

#11
Quote from: Rusty on October 07, 2012, 05:24:39 PM
Mate ... why are you "absolutely disgusted" that the nuts are loose ? That must just be bike movement and vibration working them loose ... a dealer isn't going to check them as part of any service and when you tell Alfs about it he'll go " Oh well they do work loose sometimes we'll check on it next time " ... smile ..... 
PS ... how is the solar charger going ?  :smiley:
[/uote]
all up & running,even work's well on overcast (cloudy) day's.i've seen a 12 volt DEHUMIDIFIER which i may get.gotta do a little homework 1st.

viper

Quote from: Rusty on October 07, 2012, 05:24:39 PM
Mate ... why are you "absolutely disgusted" that the nuts are loose ? That must just be bike movement and vibration working them loose ... a dealer isn't going to check them as part of any service and when you tell Alfs about it he'll go " Oh well they do work loose sometimes we'll check on it next time " ... smile ..... 
PS ... how is the solar charger going ?  :smiley:

kinda what i was thinking but didnt want to be in another forum fight, some people take umbridge when you give it to them straight, well said