News:

1400 GTR - A beast

Main Menu

Corroded Fuel Filler Lock

Started by Dive1082, February 19, 2012, 10:06:21 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Dive1082

Hi Guy's,

Has any one had any issues with their lock on the fuel filler cap corroding?  And if so, do you think this is covered by warranty?

See Pic
A friend in need....Is a pain in the a**

Lonewolf

Yep, mine looks like that, but then mine is an 07 plate.

Dive1082

Mine's a 10 plate and kept under wraps... lol  Obviously Kawasaki scrimped on the finish of the hidden stuff... lol

As it's going in for the tyre pressure sensors doing under warranty (When the bloody things arrive, 2 weeks and counting!)... I thought I might try my luck with this too.  Oh and the brake disks as I hear there has been an issue with them in the past and mine feel a bit "juddery" (if that's a word...)
A friend in need....Is a pain in the a**

Kwikasfuki

Juddering brakes and the fuel cap should be covered by warranty
Find the forum useful? Please think about donating<br /><br />Kawasaki 1400GTR 2009 - 2012<br />Honda XLV1000 Varadero  2007 - 2009<br />Suzuki DL650 V-Strom 2005 - 2008<br />Kawasaki GPZ 500s 2004 - 2005<br />Yamaha SR125 2003 - 2004

Lonewolf

If its corroding you can only ask.

Dive1082

Ok, lets open a book to see if they say "yea" or "Neigh"..... :mfr_lol:
A friend in need....Is a pain in the a**

Dive1082

Just noticed one of the headlight bulbs is out... I think that would be pushing the warranty a bit!!! lol  Anyone know off hand which bulbs they are?  Just though I would look up the price etc whilst I am sitting on my fat ass at work... lol
A friend in need....Is a pain in the a**

Lonewolf

Not sure of the code, just pop one out and have a ganders. 

Dive1082

A friend in need....Is a pain in the a**

slane

yep ,mine looks like that as well , but then again mine had it fair share of issues ,brakes, poor fitting pannels,centre stand rotting, paint flaking and all this on a 2010 bike thats kept garaged and washed down after a winter ride :sad:

Dive1082

I haven't been that unlucky...  :sweatdrop:
A friend in need....Is a pain in the a**

Dive1082

Just remembered that I have the service manual on my I-Phone.  They don't make it easy.. lol  I have a choice of:

High - 12v 60 W
Low - 12v -55 w

No mention of side lights though! lol  I guess high is high beam and low is dipped.
A friend in need....Is a pain in the a**

viper

headlight bulb is a standard H4 from halfrauds, i picked up a bulb kit from there a few weeks back and all the bulbs on the bike are standard car ones apart from the rear which is obv LEDs

Dive1082

I have just seen a pair of Phillips High intensity ones here www.motorbulbs.co.uk which at £32 seem expensive but look seeeeexy.... Might hold on with one bulb and invest in these! lol   :biker3:
A friend in need....Is a pain in the a**

viper

Quote from: Dive1082 on February 19, 2012, 10:54:46 PM
I have just seen a pair of Phillips High intensity ones here www.motorbulbs.co.uk which at £32 seem expensive but look seeeeexy.... Might hold on with one bulb and invest in these! lol   :biker3:

is one bulb out on a bike lawful, on a car yes, but a bike ??