pillion footpegs

[O.C.]

the standard pillion footpegs are not ideal and I reckon would be better with a rubber covering for confort/grip

On my last GTR I fitted the lowering kit available from Larrys, but I understand that the Kawasaki ER6F standard footpeg will fit straight onto the GTR, which seems like a good idea albeit it doesn't lower the pegs

The OEM parts are pricey, but I have seen this site, which is unfortunately some distance away, selling front pegs which may or may not do the job....does anyone have any experience of this mod? or am I going to have to spend with larry again

http://www.ebay.co.uk/itm/Kawasaki-ER6N-ER6-ER-6N-Left-Foot-Peg-Footpeg-Step-Rubber-2009-2010-2011-2012-/180793325039?pt=UK_Motorcycle_Parts&hash=item2a181f35ef[/b]

[viper]

 they will work but need a slight modification  !

The difference between front pegs and rear pegs is the fitting bolt size. Front pegs use 12mm as the ones in your link and rear ones use a 6mm pin.
I too did not want to stump up £80 for FJR or ERN ones so i used 12mm ones for the front , you then either need to drill out the whole on the rear to accomodate or buy a piece of 12mm hollow steel from b and q and make an insert for the new pegs to take them down to 6mm.

I did this 2 years ago and my pillion stands on them to get on and off and are still holding strong.

Its shocking that kawasaki dont fit rubber pegs on a touring bike, other makers do on much lesser machines !

i used these, cheaper for the pair , not originals but they are ok

http://www.ebay.co.uk/itm/KAWASAKI-ZZR-1200-OEM-STYLE-FOOTRESTS-FOOTPEGS-/160586924842?pt=UK_Motorcycle_Parts&hash=item2563ba032a

ive got some pics if you need them

[Rusty]

£80 ?  That is awful ! How can K justify that ?? I was giving the GTR a good clean yesterday ( I know, I'm always cleaning it ! ) and my left foot peg rubber is worn a fair bit but the right one looks fine and was thinking of having new ones for the 12000 mile service .. now I am thinking that perhaps "worn" looks good !  ;D

[O.C.]

Thanks Viper, that looks like just the job

Larrys tell me that their lowering kit will not fit my bike unless it has the standard spud launcher pipe...which it doesn't, and TBH Gillian doesn't complain about leg room, but I would feel much happier that she isn't going to slip on the metal pegs, which I are a stoopid fitment on a bike of this calibre.

So I reckon I'll try your recommended mod with some tube tube/sleeve to reduce the bolt size on the hanger.

Thanks again  ;)

[viper]

olde cloney, making those reducers for your new rear pegs is not as easy as i remembered, so i was doing some fabricating today and i knocked you up a pair, if you want them, if not its ok , i will find another home for them.

They will reduce a 12mm hole down to a 6mm hole , made from steel so will need some clear nail varnish to stop the surface rust

[O.C.]

Thanks Viper..much appreciated..,

I haven't made any up as yet. I was going to wait until the pegs arrive and then fabricate something.

If you already have some spacers made that would be great, and will save me a job

I'll P.M you and sort that out...   ;)

[viper]

wait til you get them and see whats what, you might find a better solution, be interesting to see . Im sure someone else will use them if not

[O.C.]

Cheers Viper

P,M sent

[sidders1400]

Hi olde coney

With reference to the lower rear pegs, I have fitted some to my GTR. The problem that I'm finding now is that my other half's foot catches the exhaust if she is not careful. In her defence she has only a small foot (size3) any larger and it would really scrape it. It is the standard potatoe thrower !!!!!!

I have looked at a bracket to protect it but not got around to buying it yet will have it fitted by summer!!!!!! :)

Cheers Sidders :)

[viper]

ive got the peg lowers off my zrx1200, they fit my Gtr fine but they are about 2mm above the exhaust but quite forward, my shoe size 8 pillion does not seem to have a problem , I wonder if they are angled different or my pillion is just more bike friendly  :)

[bradders94]

Checked a couple of er6n's today and neither had rubber topped pillion footpegs so if you were looking you would have to specify the right year/model. The 2012 model has them, there are some pics in Bike this month. Has anyone used either projektd or sporttouring's footpeg lowering kits?

Chris

[O.C.]

Checked a couple of er6n's today and neither had rubber topped pillion footpegs so if you were looking you would have to specify the right year/model. The 2012 model has them, there are some pics in Bike this month. Has anyone used either projektd or sporttouring's footpeg lowering kits?

Chris

Thanks Bradders...the pegs required would have been from an Er6F (faired), not the n (naked) version

I don't think its possible to lower the pegs on my bike as I have a two brothers can fitted which would likely foul on the lowering kit. The main objective was to replace the standard metal pegs with a rubber covered variety, to increase pillion comfort.

Motorcycle Larrys do offer a rubber covered (FJR) kit which also lowers the pegs, but apparently only with the standard exhaust

[viper]

Thanks Viper..much appreciated..,

I haven't made any up as yet. I was going to wait until the pegs arrive and then fabricate something.

If you already have some spacers made that would be great, and will save me a job

I'll P.M you and sort that out...   ;)

got the post today, winging their way up the motorway as I type . Let us know how you get on

[O.C.]

Spacers just arrived  Thank you V mucho 

I'll try and fit 'em later today, when I get chance

top Man Viper ..

[O.C.]

Pegs fitted today.. its an easy fix and took less than 20 minutes in all.

first remove old crap pegs.. release 'C' clip pin and plate. take care not to lose compresion spring and ball bearing



New peg offered up



Pin, spring plate and ball.. you need to save spring & ball bearing. plate 'C' clip and pin can be reused



New peg in place using saved pin spacer/plate and 'C' clip....gently squeeze 'C' clip back into place.



Finished job...obviously you need to do both sides 



Sorry about the poor quality pictures and its worth knowing that the new pegs will recoil but will not stay in the 'out of use/upright' position as the ball/spring mechanism cannot be used with this mod...I'll look at doing something about this..but it really isn't a problem as pilliuon comfort/safety is vastly improved the pegs cost about £20  plus P &P.