few pics of the remus exhaust fitted

[Kwikasfuki]

Mine has the baffle out and at idle its not any louder. Sounds better at speed

Did you put on a new exhaust gasget?

[2kwacks]

Mine has the baffle out and at idle its not any louder. Sounds better at speed

Did you put on a new exhaust gasget?

have you fitted the remus exhaust! the reason am asking is the remus link pipe was a dam tight fit. and there would be no way I would have got it to slip on if the gasket was used! most other after market cans have fitted don't use a gasket! I do have a slight blow at the link but expect this to close after a bit of use. if you have a remus fitted and you have also fitted the original gasket or even replaced with a new gasket then let me know! will take another look at it.

[Kwikasfuki]

Yes, I have the remus as well.
Mine didn't fit with a gasket either and probably blows a bit.

[2kwacks]

Yes, I have the remus as well.
Mine didn't fit with a gasket either and probably blows a bit.

I'm 99% sure that this remus exhaust should not have a gasket on the link pipe. for one! there's no way it would have slip over with a gasket in place, its as tight as a nats chufter or as a duck's chufter and that's water tight ;D also am sure if remus go to so much trouble designing a quality exhuast am sure they would have included the gasket if its was required. I have now loosened the clamp and turned it slightly and re-tightend it, I expect the second tightening to stop the slight leak. if not, the carbon deposits in time should bung it up ;)

[Cartman]

Finally caved at the NEC today and bought a Remus Okami, same as a hexagons but with composite outlet cap and stainless inlet, as opposed to carbon. Significantly cheaper and got a good discount too  ;D

[2kwacks]

Finally caved at the NEC today and bought a Remus Okami, same as a hexagons but with composite outlet cap and stainless inlet, as opposed to carbon. Significantly cheaper and got a good discount too  ;D

nice one! was going to buy the remus okami they were selling "new" on ebay for £280.00 with free postage! which I thought was reasonable. but did see the carbon hexacone on the same model as mine when I was out and about, and it looked excellent and really suited the bike with it being carbon black and carbon inlet and outlet, so bit the bullet and orderd one from d&k. have not told the wife how much it cost yet, and don't have any plans on doing so either ;) up to now she as not noticed it from the black standard can, but there's only so long I can hide her glasses for ;D some pics when it's been fitted please!

[Rusty]

Yes Mr Cartman ... we want to see the lovely pictures ........

[Cartman]

Yes Mr Cartman ... we want to see the lovely pictures ........

Finally got round to fitting the exhaust after the bike's triumphant return from the dealer. Great looking can, easy to fit and fits superbly, sounds sooo much better too. I think the pick up is better and the bike feels more alive. didn't put the stickers on because I liked the stock look on the bike. Really chuffed and being composite and stainless it should last well too. So in short Remus Okami highly reccomended! :D

[Lonewolf]

Have you any pics of it with the panniers on?

[Cartman]

Have you any pics of it with the panniers on?

Err yes the middle one ;)

[Lonewolf]

Err yes the middle one ;)

Lol, I never even noticed.  ;D  How silly do I feel now?  ::)

[Cartman]

Lol, I never even noticed.  ;D  How silly do I feel now?  ::)

Tee hee ;D

What do you think though?

[Lonewolf]

It does actually look very good indeed.  ;D

[2kwacks]

very nice indeed :) nearly as nice as my remus carbon hexacone  ;)